Things To Know About The Flat Pack Assembly

Flat Pack Assembly

If you have a new IKEA item to assemble, you will notice that its has a lot of different parts and can be a bit intimidating. Your product is delivered in flat packed boxes with clear instructions and all fittings required for assembly. The only thing you need to provide is a spanner or Allen key which is used on all the screws.

Is flat pack assembly hard?

The first time can be challenging but with practice it gets easier. The first time always takes longer as there are a lot of pieces to get used to and instructions that need to be followed carefully. If you are still struggling after an hour, contact us for professional help.

When will my furniture be assembled?

We usually require 24 hours notice, but this may vary depending on our schedule. For example, weekends are often very busy and we might need more than 24 hours notice because our furniture assemblers are busy in other places at the moment. For urgent jobs we often can arrange same day service if needed.

You are going to place the flat pack assemble in any area you want. It is up to your choice, and you have the right to decide what you want. It depends on your needs and requirements. If you want to place it in a specific area, then you have to consider some important points that we are going to mention below. Here are some things to know about the flat pack assembly.

The location of the furniture

The first thing you have to consider is the location where you are going to assemble the furniture. You have to make sure that it is convenient for you because it will help you a lot if it is easy for you to reach it easily. You can find different types of furniture in this regard, and all of them will serve different purposes to help you out with your work.

Make sure that it is easy for you to access them and easy for your children as well so that they cannot get injured while using them or playing with them. In addition, the size of the flat pack assembly should be appropriate so that it fits into the area where you want it placed.

The flat pack assembly is a very common thing in our life. When we buy furniture, we need to assemble some flat packs. If you are not familiar with the flat pack assembly, it will be very difficult for you to finish the installation work. Today, small make up to introduce some knowledge of flat-pack assembly.

Flat pack assembly work is generally divided into two parts: installation and adjustment. In the installation process must pay attention to the following three points:

1, according to the standard parts should be assembled together, can not be assembled in advance, so as not to affect the subsequent installation.

2, do not use excessive force when installing fasteners, so as not to damage the components or increase the difficulty of subsequent installation;

3, in order to facilitate the installation and reduce the difficulty and error rate of subsequent adjustment work, it is recommended that the components should be installed and fixed firstly as much as possible;

When adjusting, pay attention to the following three points:

1, do not use excessive force when adjusting;

2, after adjustment is completed, check whether each component is properly installed again;

3, after confirming that there is no problem with each component and part of each component (surface), it can be used.