Wall Insulation: Why Have It In Your Home 

0
279
Wall Insulation

You could be wasting energy, money, and time by neglecting your home’s insulation. As a result, one of the cheapest and most economical ways to safeguard your home is using insulation on the walls. Wall insulation can be made from many different materials and combinations of materials, including rock wool, polystyrene, polyurethane foam, cellulose, and recycled plastics. This article will tackle more about wall insulation.

What Exactly Is Wall Insulation?

Wall insulation is the process of installing insulation in the walls of a building or between the frames of a wall. It can be done in many different ways and for different reasons. It functions by squeezing air through multiple sheets of a substance, typically fibreglass or batt insulation.

These layers act as an insulator that keeps heat from escaping through the walls during the winter when you need it most! The air trapped between these layers also keeps heat from escaping during the cooler months, which means you will not have to turn up your thermostat as high when it’s cold outside.

The purpose of any type of insulation is to reduce heat loss and gain within the building envelope. This helps to keep the interior temperature more stable, which in turn saves energy and reduces maintenance costs. It is also cheaper than using central heating systems like boilers or radiators. It also means that you don’t need to worry about paying energy bills when it comes to keeping warm during the winter months or cool during the summer months.

What Type of Insulation Should I Use?

Insulating an existing house can be difficult because you may need to know where to start or what materials are best for the job. There are several different types of wall insulation that can be used in different places inside your home, depending on what type of insulation works best under different conditions. Here are some of the common types of wall insulation that you can choose from to install in your

  • Batt Insulation 

Batts are rolls of fibreglass or mineral wool that you install between studs in your walls. Batts come in different thicknesses, but most are about 2 inches thick when compressed into place and expand as they take on moisture from inside the house. If the batt insulation is done properly, it should last 20 years or more before needing replacement.

  • Cellulose Insulation 

Recycled newspaper that has undergone chemical flame retardant treatment is used to make cellulose. For both new and old homes, professionals typically blow or spray it into attics and walls to provide insulation. Cellulose insulation is fire-resistant, mold-resistant, and waterproof (although it does need to be replaced every ten years or so).

  • Blow-in Fibreglass Insulation

Blown-in fibreglass is one of the most popular forms of wall insulation because it’s easy to install and cost-effective. This type consists of loose fibres that are blown into place using an air compressor and hose attachment. The process involves drilling holes in the studs, filling them with fibreglass insulation, covering all holes with tape or foil wrap, and then taping over any areas where wires or pipes penetrate the walls.

  • Fibreglass Insulation 

Fibreglass Insulation is made from glass fibres that are twisted into strands and then wrapped in plastic. It’s very effective at keeping heat inside a home, but it can get pretty expensive. Fibreglass insulation is also very brittle, which means it can break if there’s an impact from something like dropping a heavy object on it (like a picture frame).

Why Is Wall Insulation Needed for Your Home?

Wall insulation is a home project that truly improves the overall state of your home. It will be more cosy to stay in, and you can reduce finances on your power costs. Here are more reasons why wall insulation is needed for your home:

  • Energy Efficiency 

One of the main reasons why people choose to use batt insulation to insulate their walls is because it helps them save money on their energy bills over time. When there is less heat escaping through your walls, there will be less money spent on heating and cooling costs each month.

  • Reduced Noise Levels

Another benefit of wall insulation is that it reduces noise levels inside your home by up to 50%. Therefore, if you have noisy neighbours, they will no longer be able to bother you because you won’t be able to hear them!

  • Cutback on Carbon Emissions 

Since it requires less power to warm and cool a space, batt insulation also contributes to a reduction in carbon emissions. This means that you are helping reduce pollution and greenhouse gas emissions into our atmosphere by insulating your walls, which will ultimately reduce global warming.

In Summary 

Insulating your walls is a cheap approach to increasing your home’s energy efficiency. It can help you save money on your heating bills, make rooms more comfortable to live in, and reduce carbon emissions. There are a lot of types to choose from on the market today, like batt insulation, cellulose insulation, and many more.